ELEVATE S60R (2003 to 2007) Performance Software

main
sub catagory: 
Engine Performance
Stats: 
  • Highest power gain for the lowest cost available
  • Fast, easy installation of custom tuned software files 
  • Easy to use APC Handheld programming tool
  • Easily program ECM back to stock or switch to other custom files
  • Non-invasive flash programming through OBDII port
  • Optional DTC code reading and clearing
  • Engine Power Gains: 
    • R (300hp): +39hp, +57ftlb (77Nm) of torque
    • T5 (247hp): +45hp, +62ftlb (84Nm) of torque
    • T5 (256hp): +60hp, +71ftlb (95Nm) of torque
    • 2.5T (208hp): +41hp, +71ftlb (95Nm) of torque
    • 2.4T (194hp): +39hp, +77ftlb (105Nm) of torque
    • D5 (182hp): +40hp, +52ftlb (70Nm) of torque
    • D5 (163hp): +37hp, +81ftlb (110Nm) of torque
    • 2.4D (163hp): +62hp, +95ftlb (130Nm) of torque
part_thumbs: 
photos
part image changeup: 
discrip_box
Description: 

ELEVATE Performance Software Tuning is truly a revolution in Volvo car performance.  We offer the best, custom tailored tuning files with the easy to use APC handheld programmer.  Tuning your Volvo for significantly more power takes just four minutes.  After installation, the driving experience of your Volvo will be much more engaging with a significant increase in power and acceleration.  
 
Performance Software Tuning is the art of tailoring the standard ECM (Engine Control Module) software file, which is stored in the factory engine management system, to your fuel.  To increase the power output of an engine, we modify the file maps which control turbo boost (on turbocharged cars), ignition timing, fuel delivery, and throttle response.  By adjusting these parameters specific to your fuel octane, your engine will be optimized to produce maximum power and efficiency.  Your car comes from the factory with a “dumbed down” software file to be able to accommodate the worst of fuels that a customer might put in the car.  By you using higher octane, premium fuel, we create a file specific to the octane you most commonly have access to.  You can choose from 91, 92, 93, 94 or other octane based on the AKI test method of R+M/2.
 
The Best Performing Software Files
ELEVATE has partnered with Autotech Motorsports of Sweden to optimize files for our customers around the world.  Our team of software engineers has been calibrating engine management systems since 1994, and has been specialized in Volvo applications since 2001.  We perform all of our testing and evaluation on the road (and race track where relevant) and prove the results on either our Rototest (www.rototest.com) dynamometer in Sweden or a Dynapack (www.dynapack.com) dynamometer in the US.  These hub-mounted chassis dynamometers are the most accurate on the market, as they measure true wheel torque at the hub rather than a tire interfacing with a huge roller.  We engineer our files to deliver the maximum power without compromising engine or drivetrain life.  To make sure our competition stays in our rear view mirrors, we frequently evaluate their files to assure our customers that they are getting the best performing software on the market.  
 
Software Installation Challenges of the Past
Over the years, there have been several ways of installing software into your Volvo’s ECM, and each has their draw backs.  The most common has been removing your ECM, shipping it off, and waiting for its return.  With this, your car is inoperable without the ECM in place.  Some companies using older technology require you to read your software file, send it to them and wait for several days for a tuned file to arrive for you to then install.  Anytime you “read” your engine software file, it is critical that a professional battery conditioner be in place during the reading process.  Anytime your Volvo retailer plugs into the OBD II port, they first connect an expensive battery conditioner to ensure the battery does not fall below a certain voltage during communication with the car’s electronic systems.  Depending on the equipment being used to read the engine management software, the process can take well over an hour and a half.  During this time, it is very possible that the battery would lose charge sufficient to causing the car’s computer to crash.  You are then faced with an immobilized car being towed to your dealership with some explaining to do about how your car’s computer crashed…
 
Software Installation Solution for Today and the Future
ELEVATE has created two easy, fast, and trouble free means of tuning your Volvo.  Pricing is the same for either method—you choose which is best for your application.
 
APC Handheld Tuner:  When you order, we ship you the APC tuner with easy to follow instructions and a USB cable for use with most any PC computer with an internet connection.  Simply install the software provided, perform a "Sync", and both your Stock and Modified files will be downloaded from our server to your handheld programmer.  Next, plug the APC programmer into your OBDII port and follow the on-screen instructions to upload either your Stock or Modified file.  Four minutes later, your car is tuned!  We create your tuned file by tracing your car’s Vehicle Identification Number (VIN).  This method allows us to create an accurate file for your specific car.  The APC Tuner is shipped with a carrying case and USB cable.  Should you ever need to add vehicles (up to three) or files (up to five per vehicle) to your APC Tuner, you will need access to a PC computer with internet connection.  We prepare the file(s) for you and a simple “sync” with our server downloads the new file(s) into your APC Tuner.  
 
 
Custom Files
For those that are looking for something tailored to their needs, we can create files specific for the below parameters for most late model Volvos.  Each custom tailored file becomes unique in addition to other stock or tuned files, allowing you to choose between files depending on the situation.  Going to the dealership?  Use your stock file.  Daily commutes?  Use your modified file specific to your pump fuel.  Going to the track with a tank of race fuel?  Use your 100 octane file with Top Speed Limiter removed.
 
Top Speed Limiter removed:  Allows vehicle to accelerate to the maximum speed possible without artificial limits imposed by the car’s electronics.
 
Engine Rev Limiter changed:  You tell us the RPM you want to be the rev limiter, and we set it.  Know that there is usually not more power to be made on Volvo turbo cars by revving them higher, but it may be helpful if your favorite track needs a bit more RPM for specific sections.
 
Octane Specific File:  In addition to your file tuned for pump fuel, we can create a file for your higher octane needs.
 
Reduced Top Speed File:  Allowing your teenager to borrow the car for a special outing?  Limit his or her top speed to a reasonable rate.
 
E85 Fuel File:  Maximize the benefits of running high octane E85 fuel using this file.  You will typically see a gain of +17hp and +22ftlb. (30Nm) of torque over our fuel specific tuned file.
 
Multi-fuel File:  Allows you to run either premium unleaded or E85.
 
Diagnostic Trouble Code Reading and Clearing Capability
Available as an upgrade option at the time of purchase or anytime thereafter, we can enable your APC Tuner to read and clear all Diagnostic Trouble Codes (DTC).  Easy to use with fully detailed descriptions of the DTC’s.
 
Pricing
ELEVATE Performance Software Tuning: $795.00
 
APC Tuner includes: Tuner, Instructions, USB cable, carrying case
 
Custom Files: $190.00 per file
 
DTC Reading capability upgrade: $150.00
 
When ordering
Please make sure you provide your vehicle’s VIN number, what octane you want us to tune to, and what modifications you have (Elevate Downpipe, Elevate Exhaust, Elevate Intake, etc.) so that we can create a perfect file for you.
 
PC Computer System Requirements
 
The following minimum PC requirements are:
• Windows 2000, XP, Vista, Windows 7 (32-bit or 64-bit)
• 256MB RAM (minimum)
• 800 x 600 Display Resolution (or better)
• Pentium 4 or greater CPU (or comparable Pentium M, Core, Athlon, etc)
• USB 2.0 port
• An internet connection in order to periodically synchronize with the server